Terminal Permanent Disable; Making Calls - Motorola TETRA MTM800 Manual

While your MTM800 is disabled, it will display
the following blank screen.
Your MTM800 will act like it is turned off.
If you try to turn your MTM800 on when it is disabled it will
operate as described above.
If your MTM800 is found, your Service Provider can re-
enable it. After your MTM800 is re-enabled, you may resume
normal operation.

Terminal Permanent Disable

Your MTM800 is provided with a feature that allows your
Service Provider to disable it permanently in case it is stolen
or lost. When your MTM800 is disabled permanently, it
becomes inoperable.
After a Permanent Disable the MTM800 can not be re-
enabled by your Service Provider.
You are recommended to disable your MTM800 permanently
only when you do not expect the terminal to be recoverable
any more.

Making Calls

You are ready to place the call as required for the mode you
are in:
• press
• press and hold the PTT while talking, and release the PTT
while listening.
To dial a number for an outgoing call, enter the required
mode (Group, Private, Phone, or PABX) and use one of the
methods described on the following pages.
For more details on mode specific dialling methods, see the
relevant mode section in this guide.
Since the same numbers can be used in different modes for
various subscribers (if configured), be sure to make the calls
to initiate the call and to end the call.
19