Motorola TETRA MTM800 Manual page 216

• Bandwidth of the data session
• Data encryption status.
Data services are only available in TMO. The data option must
be set to Voice&Data or Data Only. (Refer to "Setting Up Data
Mode" on page 80).
Viewing Sent Data Statistics (
1. In the Packet Data sub-menu select 1 Sent.
2. The number of KBytes sent since current
packet data activation is displayed.
3. Press
Throughput: 9 kbps (e.g.) — active packet
data session.
Throughput: N.A. — standby packet data session.
4. Press
Viewing Received Data Statistics (
1. Select 2 Received in the Packet Data sub-menu.
2. The number of KBytes received since
current packet data activation is displayed.
3. Press
Throughput: 9 kbps (e.g.) — active packet
data session.
Throughput: N.A. — standby packet data session.
4. Press
Viewing Bandwidth Status (
The bandwidth percentage represents the number of
allocated time slots ("channels") during the data session.
1. Select 3 Bandwidth in the Packet Data sub-menu.
92
to toggle the two screens.
to exit.
to toggle the two screens.
to exit.
9 2 1)
9 2 2)
9 2 3)
Sent Data:
100 KB
Throughput:
9 kbps
Received Data:
100 KB
Throughput:
9 kbps