Motorola TETRA MTM800 Manual page 169

and repeater. The Gateway and Repeater icons will
disappear.
• If you press PTT while both gateway and repeater are
available, but the call is rejected by the gateway, a
repeater call will be attempted.
> If it is successful your MTM800 will display the mes-
sage Repeater Call and a call via repeater will pro-
ceed. The Gateway icon will disappear.
> If it is not successful your MTM800 will display the
message MS – MS Call and a terminal to terminal
call will proceed. The Gateway and Repeater icons
will disappear.
• If you press PTT while both gateway and repeater are
available, a gateway call will be attempted.
> If it is successful your MTM800 will start a DMO call
with gateway. The Gateway icon will be solid. The
Repeater icon will disappear.
> If synchronising with a gateway is not successful a
repeater call will be attempted.
> If it is successful your MTM800 will display the mes-
sage Repeater Call and a repeater call will proceed.
The Gateway icon will disappear and the Repeater
icons will be solid.
> If it is not successful your MTM800 will display the
message MS – MS Call and a terminal to terminal
call will proceed. The Gateway and Repeater icons
will disappear.
If Gateway and Repeater mode is selected, and if one of the
devices is not available, the call setup is proceeding as if this
device was not selected.
Example: In case of the Gateway is available and the Repeater
is not available, after an unsuccessful Gateway call attempt the
call falls back to MS – MS mode immediately with the MS – MS
call message.
45