Motorola TETRA MTM800 Manual page 227

• Press to overwrite the character to the left of the
cursor position with a "space" and then, to move the cur-
sor to the left.
• At the present location of the cursor – press the
required key to obtain the required character.
• In this editor – long press on the
"Caps Lock".
A predefined message address is also defined by your Service
Provider during programming and cannot be changed.
5. Press to send the message. The display will show one
PTT
of the following delivery reports:
Message Delivered
successfully sent and received.
Message Failed
After sending the message, your MTM800 will return to the
predefined template selection screen.
You will not be able to send another message while your
MTM800 is awaiting message acknowledge.
— to indicate that the message was
— the message was not received.
#
key functions as
103