Motorola TETRA MTM800 Manual page 178

• direct dial,
• speed dial,
• one-touch dial, or
• list scroll.
Press
Last Number Redial
When no number is displayed, pressing PTT will redial the
last dialled number.
Direct Dial
1. Dial the full phone number using the keypad.
2. To place the call, press
3. To hang up, press
Speed Dial
Speed dial allows you to dial a shortened number of up to two
digits instead of the full number. The speed dial number is the
location of an entry in the address book.
1. Enter the pre-programmed speed dial number (for exam-
ple: 5) and press
2. To place the call, press PTT.
3. To hang up, press
One-touch Dial
One-touch dialling allows you to place a call by pressing and
holding one of the numeric keys (2 to 9). The number is the
location of an entry (2 to 9) in the address book.
1. Press and hold the required numeric key for a few seconds.
Your MTM800 will display the number and dial it.
2. To hang up, press
If the one-touch feature is enabled, one-touch dial is disabled
(see page 17).
54
to return to the mode display.
.
.
#
.
.
.
PTT