Private Call In Dmo - Motorola TETRA MTM800 Manual

If the called person ends the call, the
displayed.
For call alert, see settings in the Tones menu option (page 83)

Private Call in DMO

If configured by your Service Provider it is possible to make
and receive a Private Call in DMO. You can make or receive a
DMO Private Call only when your MTM800 is in DMO.
Private Calls via DMO Repeater and/or DMO Gateway are not
supported.
The calling and called party shall be on the same talkgroup.
Making a DMO Private Call
1. To enter the Private Mode press
2. Enter a number like described in "Entering
the Private Number" on page 49.
3. Press and hold PTT. Wait for the talk permit tone (if
configured) before talking, and release the PTT when
listening.
4. The call ends after a pre-programmed time, or if you
press
There is no presence check for Private Calls in DMO. This
means you don't know whether the called party is available
when you starts the call.
Receiving a DMO Private Call
When a DMO Private Call is received, the
call is started immediately without need to
accept it by the called party.
1. Press PTT to talk back and start talking.
2. The call ends after a pre-programmed time, or if you
press
.
.
message is
Call Ended
Private Mode
2234
Prvt in Use
David
.
51