Motorola TETRA MTM800 Manual page 165

Selecting
DMO Group Call via Gateway (
While in DMO, proceed as follows to choose a gateway to set
up a call via Gateway for the selected talkgroup:
1. Press
2. Scroll to
3. The display shows the last gateway selection method. Use
the navigation key to scroll to your selection and press
Automatic — the MTM800 will use the
first available gateway for that talkgroup.
The Gateway icon will blink upon selecting
that option.
Specific — the MTM800 will use only the gateway with the
specified Gateway address for that talkgroup.
Upon selecting "Specific", you will see one of the following
displays:
• The selected gateway address (e.g.:
1022), pre-programmed by your Serv-
ice Provider or previously entered by
yourself via the keypad. Press
use the current address, or enter a new address via the
keypad, and press
upon selecting the gateway.
• "None", indicating that no gateway was
selected for that talkgroup. Enter an
address via the keypad, and press
The Gateway icon will blink upon select-
ing the gateway.
When the MTM800 detects the suitable
gateway, the Gateway icon will turn solid.
, scroll to
3 Config,
and press
2 Gateway
3 2)
and press
.
to
. The Gateway icon will blink
.
.
1 MS – MS
2 Gateway
:
1 Automatic
2 Specific
GW No: 1022
Will Be Used
Selected GW:
None
DMO Range1
DMO TG1
41