Motorola TETRA MTM800 Manual page 135

To power off:
• Press the On/Off pushbutton again.
• If the radio is powered on via the ignition, it can be turned
off via the ignition or the On/Off pushbutton
You will see the
The terminal powers On and Off without visible and audible
notification if Covert Mode is activated. (Refer to "Covert Mode"
on page 23.)
Uninstalling the Radio
Unlocking the MTM800
Your MTM800 may be locked at power up. To unlock, see
"How to unblock the MTM800" on page 75.
Selecting Your Network
Before you start operating your MTM800, you can select the
network you want your MTM800 to be registered to. For
detailed information, see "Network" on page 86.
Powering On with activated Transmit Inhibit
If the terminal has been powered Off with activated Transmit
Inhibit (see "Setting Transmit Inhibit (TXI) Mode" on page 87)
the TXI Mode remains active.
When powering On with activated TXI Mode
the user will be asked whether to leave the TXI
Mode or not.
message.
Powering Off
OPTION 1:
Before disconnecting the 13.2V main power
supply from the radio:
1 Switch off the radio.
2 Wait for a minimum of 4 seconds after the
radio Off Switch is released.
Disconnect the 13.2V main power supply.
OPTION 2:
Turn off the main power supply WITHOUT
switching OFF the radio.
1 Exit TXI
2 Stay In TXI
11