Motorola TETRA MTM800 Manual page 153

Using the Navigation Key
Your Service Provider configures the
MTM800 to display only selectable
talkgroups. Press the navigation key to scroll
to the required talkgroup and press
talkgroup range scrolling configuration, see note in "Selecting
a Range" below.
Using Alphabetical Search
1. In Group Mode, press
2. Select
abc
press
3. You are now at the talkgroup alpha search
screen. Enter an alphanumeric digit, and
the MTM800 starts searching for the first
Talkgroup alias, that starts with that character. Use the
navigation key to scroll to adjacent aliases. In this example
"a" is entered.
4. Scroll and select the desired talkgroup by
pressing
start a call on the new group.
Using the Numeric Keypad
When the terminal is in group mode and not transmitting (i.e.,
idle or receiving a call), you can dial a group by entering its
speed number via the keypad. This feature is called
Talkgroup Speed Dialling. The speed number is pre-
configured in the terminal.
You can also view a speed number attributed to a group, if it
exists.
.
for talkgroup alpha search and
.
, or press PTT to select and
Range 10
Talkgroup 2
. For
Range 1
TG 4
5 View Speed#
1 abc
abc: Group
A = A team
3500
29