Motorola TETRA MTM800 Manual page 141

Key
9
WXYZ
0
#
Programmable Keys
Your MTM800 supports the one-touch feature that allows you
to select/activate commonly used features by pressing and
holding a numeric key. Your Service Provider should program
the numeric keys with the relevant features. All the numeric
keys on the keypad are programmable. The following table
lists the programmable features and their availability in
specific MTM800 states/modes. For detailed information on
the features, see the relevant section in the user guide:
Feature
Talkgroup Switch
Talkgroup Scan
Status Message
Speaker on/off
Call dial (Private,
Phone, PABX)
Transmit Inhibit
(TXI)
Covert Mode
If the one-touch feature is enabled, one-touch dial is disabled
(see page 54).
Alphanumerics
W X Y Z
9
w x y z
9
Space * / %
0 + -
# = < >
Switch to a specific talkgroup
Enables/disables the Talkgroup Scan function.
(TMO only)
Sends a dedicated status message to a
dedicated address. (TMO only)
Directs voice audio to the earpiece of the
headset or to the external speaker.
Initiates a call to a predefined entry in the
address book. (TMO only)
Toggles between activated and deactivated
TXI mode.
Toggles on/off covert mode
Description
17