Motorola TETRA MTM800 Manual page 226

• Press PTT to send the message. The display will show
one of the following delivery reports:
Message Delivered
successfully sent and received.
Message Failed
• Scroll to Edit and press
template for your needs. Refer to "Editing the Text" on
page 15.
• Scroll to Erase and press
plate.
Sending and Editing a Predefined Template
Predefined mail templates are templates that are
programmed into your MTM800 by your Service Provider.
You are allowed to perform limited edit operations of the
predefined template and to send it, but you will not be able to
store the edited template or erase it from the Templates List.
1. Scroll to
The first template in the Predefined Tem-
plate List is displayed (if no predefined
template exist, the message
will be displayed).
2. Scroll through the Templates List using the navigation keys
and choose the required template (in the example, a
registration message is displayed).
A predefined message can only be sent from the Edit screen.
3. Press
editor.
4. Enter your message.
• To move the cursor forward – press
• To move the cursor backward – press
102
— to indicate that the message was
— the message was not received.
and press
3 Predefined
The message is now in the predefined message
.
to edit the message in the
to erase the current tem-
.
No Predefined
Register:
abc 27
.
.