Selecting A Range; Activating/Deactivating Scanning; Making A Group Call - Motorola TETRA MTM800 Manual

Selecting a group during a call
If you start selecting a group during a call, Group In Use or
Emgcy In Use display disappears.

Selecting a Range

To select a range:
1. Press
2. Use
3. Press
in the new range).
The Service provider can configure range scrolling to:
• Stay in range — when the range end is reached during
talkgroup scrolling, further scrolling restarts the range
talkgroup list.
• Scroll to next range — when the range end is reached during
talkgroup scrolling, further scrolling switches to the talkgroup
list in the next range.

Activating/Deactivating Scanning

See "Setting Talkgroup Scanning" on page 88.

Making a Group Call

1. Press
You are now in Group mode. In this
example, "Range 3" is the last selected range. "Service" is
the last selected talkgroup.
2. If this is the required talkgroup and range, press the
Wait for the "Talk permit" tone (if configured) and then
speak into the microphone.
Release the
32
, Select the
Range
or to scroll through the ranges.
to confirm your selection (or PTT to start the call
.
button to listen.
PTT
option.
2 Range
3 Scanning
Range 3
Service
.
PTT