Motorola TETRA MTM800 Manual page 211

Setting Operating Mode (
To enter the sub-menu,
press
This sub-menu allows you to select the mode
your MTM800 will be operating on.
To set up your operating mode:
Select
2 DirectMode
It is not possible to switch from Direct Mode to Trunk Mode, if
the terminal is in Transmit Inhibit Mode.
To change the Operating Mode quickly you can press
Setting Transmit Inhibit (TXI) Mode (
To enter the sub-menu,
press
This mode should always be set before
entering areas where transmission is prohibited, e.g. in
hospitals or in potentially explosive areas.
To activate the TXI Mode:
• Select
1 Activate
The terminal will sound the "Transmit Inhibit" tone. The
display blinks between the Talkgroup name and the message
"TXI Mode", and the solid orange LED indicates the TXI
Mode.
All menu options which cause transmitting are blocked in TXI
Mode. It is not possible to change the Talkgroup.
To deactivate the TXI Mode, e.g. after you have left the area
where transmission is prohibited:
• Select
2 Deactivate
The terminal sounds the "Transmit Inhibit" tone and returns
back to Group Mode or Direct Mode, if Direct Mode was the
last selected mode.
6 2)
– 6 Networks – 2 Oper. Mode
, or
1 Trunk Mode
– 6 Networks – 3 TXI Mode
, and press
, and press
2 DirectMode
.
1 Trunk Mode
, and pres
s
6 3)
1 Activate
.
2 Deactivate
.
.
.
.
87