Receiving A Dmo Group Call - Motorola TETRA MTM800 Manual

Receiving a DMO Group Call

You can receive a DMO Group Call only when your MTM800
is in DMO.
Your MTM800 will display the caller's private number or alias
and the talkgroup name.
The following screens show examples of how the caller's
identity can be displayed.
For call alert, see settings in the Tones menu option (page 83)
Receiving a DMO Group Call (MS – MS)
DMO Range1
DMO TG1
Without alias
and private ID
Receiving a DMO Group Call (via Gateway / Repeater)
DMO Range1
DMO TG1
Without alias
and private ID
(e.g. via gateway)
The Gateway or the Repeater icons are displayed
accordingly to the ongoing call type (Gateway or Repeater).
• If MS to MS mode is selected, and the terminal receives a
call via repeater, the Repeater icon will be shown (if the
repeater mode is enabled by the Service Provider, otherwise
the call will not be accepted).
• If Gateway mode is selected but a gateway is not available,
The Gateway icon will be solid in case of an incoming
gateway call.
46
ID:124
or
DMO TG1
Private ID without alias
ID:124
or
DMO TG1
Private ID without alias
(e.g. via gateway)
ID:David
or
DMO TG1
Private ID with alias
ID:David
or
DMO TG1
Private ID with alias
(e.g. via repeater)
.