Motorola TETRA MTM800 Manual page 213

To see the talkgroup status (active or not active) and priority
(if pre-programmed), press
talkgroups.
Editing Scan Lists (
To enter the sub-menu, press
The display allows you to scroll through the
scan lists to see the number of talkgroups
used per list.
To edit/view the contents of a scan list, press
to your selection.
Press
options:
1. Add a talkgroup to the selected scan list.
Every added talkgroup (including a favourite group) comes
with its range, its name or number, and its priority (if pre-
programmed).
• To select a range, scroll through the range list. The list
does not show ranges whose talkgroups are fully used
in the selected scan list. Press
• To select a talkgroup, scroll through the talkgroup list
within the selected range. The list shows talkgroups that
are not in the selected scan list. Press
• To set a priority to a talkgroup, scroll through the priority
list: high, medium, or low.
A call from a high priority talkgroup and with a higher
priority than the on-going call will interrupt it.
A call from a medium/low priority talkgroup will not interrupt
the on-going call.
2. the contents of the active scan list
View
(range, talkgroup, and priority if pre-
programmed) by scrolling through it.
7 3)
to select one of the following
and scroll through the
,
– 7 Scan – 3 Scan Lists
Scan List 1
Used: 4 Free: 36
5 Clear List
1 Add Group
to select a range.
Range 1
Talkgroup 1
.
and scroll
.
89