Tools Required To Install The Mx204 Chassis In Rack; Installing The Mx204 Chassis In A Rack - Juniper MX204 Hardware Manual

Tools Required to Install the MX204 Chassis in Rack

To install the router, you need the following tools and parts:
Phillips (+) screwdriver, number 2
ESD grounding wrist strap
Blank panels to cover any slots not occupied by a component
Mounting brackets, supplied with the router
Sixteen screws for securing the mounting brackets to the chassis, supplied with therouter
Four mounting screws, supplied with the router
SEE ALSO
MX204 Site Preparation Checklist | 53

Installing the MX204 Chassis in a Rack

IN THIS SECTION
Installing the MX204 Chassis in a 19-in. Rack | 83
Installing the MX204 in a 21-in. ETSI Rack | 85
82