Qos Priority; Name - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

where
<port-list>
An example is shown next.
• Enable port-based VLAN tagging on the switch.
• Enable ports one, three, four and five for configuration.
• Set the outgoing traffic ports as the CPU (0), seven (7), eight (8) and nine (9).
sysname(config)# vlan-type port-based
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# egress set 0,7-9

33.9.10 qos priority

Syntax:
qos priority <0 .. 7>
where
<0 .. 7>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the IEEE 802.1p quality of service priority as four (4).
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# qos priority 4

33.9.11 name

Syntax:
name <port-name-string>
where
<port-name-string>
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set a name for the ports.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# name Test
VES-1616F-3x Series User's Guide
Sets the outgoing traffic port list for a port-based VLAN.
Sets the quality of service priority for a port.
Sets a name for your port interface(s).
Chapter 33 Command Examples
257