Dimension GS-3012F Gigabit Ethernet Switch
29.8.13
qos priority
Syntax:
qos priority <0 .. 7>
where
<0 .. 7>
An example is shown next.
Enable ports one, three, four and five for configuration.
Set the IEEE 802.1p quality of service priority as four (4).
GS-3012F(config)# interface 1,3-5
GS-3012F(config-interface)# qos priority 4
29.8.14
name
Syntax:
name <port-name-string>
where
<port-name-
string>
An example is shown next.
Enable ports one, three, four and five for configuration.
Set a name for the interfaces.
GS-3012F(config)# interface 1,3-5
GS-3012F(config-interface)# name Test
29.8.15
speed-duplex
Syntax:
speed-duplex <auto|10-half|10-full|100-half|100-full|1000-full>
where
29-16
Sets the quality of service priority for an interface(s).
Figure 29-32 qos priority Command Example
Sets a name for your port interface(s).
Figure 29-33 name Command Example
Command Examples