Ricoh VT6000 Manual page 26

A
If necessary, lift the left and right
guides.
If you find paper is not delivered
properly when printing on thin paper,
make sure the guides are up.
When prints are not delivered prop-
erly even If the guides are up, set the
paper delivery side plates 5 mm in-
side of the proper paper size.
When printing on paper thicker than
2
81.4 g/m , 21.6 lb, do not lift up the
guides.
When printing on paper smaller than
A4, 8 " x 11", set the small paper
1/2
end plate prop.
When the guides are up, you may
not load the unit to full capacity
(1,000 sheets) depending on the pa-
per you are using.
If you have the optional tape dis-
penser installed, the paper capacity
is 500 sheets.
B
Turn on the main switch.
OPERATION
17