Printing From Several Originals At Once - Ricoh VT6000 Manual

OPERATION

Printing From Several Originals At Once

Use the Auto Cycle key to process masters and make prints at one stroke.
When you use the optional document feeder, it is not necessary to place origi-
nals one by one. All originals are fed and prints are completed after you press
the Print Start key.
If you use the optional tape dispenser, the tape dispenser drops a strip of paper
onto the top of the paper stack after the last page of each printing set is fed out
to the paper delivery table. This marks the end of each printing group.
1
Set the original face down on the
exposure glass or in the optional
document feeder.
You can set up to 20 originals into
the optional 20 originals document
feeder.
You can set up to 50 originals into
the optional 50 originals document
feeder.
2
Enter the number of prints re-
quired using the Number keys.
3
Press the Master Making key.
Check the image position of the
trial or proof print.
If the image position is not correct,
adjust it using the Image Position
keys (
plate fine adjusting dial (
24).
46
see page 23) or the side
Stop
see page
Proof
1 2 3
4 5 6
7 8 9
C 0
#
Clear Enter
Master Making
Print Start
Stop
Proof