Optional Sorter Stapler; Optional Large Capacity Tray - Ricoh VT6000 Manual

Optional Sorter Stapler

Do not remove the staple cartridge from the stapler except for setting a new
staple cartridge.
Do not put obstacles under the bins.
Do not put your hands or legs on the non-sort tray.
Do not push or lean against the sorter stapler.
When printing solid images in Sort, Staple Sort or Class Sort mode, the bottom
prints delivered to the bins might be dirty. In this case, reduce the number of
prints delivered to the bins.
When printing solid images in Sort, Staple Sort or Class Sort mode, the top prints
delivered to the bins might be dirty if the back of the previous bin is dirty. In this
case, reduce the number of prints delivered to the bins or clean the back of the
bins.

Optional Large Capacity Tray

The top sheet might remain in the feed rollers when you press the Change Pa-
per key. In this case, remove the top sheet.
When you remove the paper cassette for LCT from the LCT, the top sheet might
remain between the feed rollers. In this case, reset the remaining paper in the
cassette.
When you use bad quality paper under high temperature and humidity, do not set
more than 1,000 sheets of paper in the LCT at a time and set new paper stack
after running out old paper.
OPERATION NOTES
213