Ricoh VT6000 Manual page 245

PREPARING IMAGE MAKE-UP
Notes about drawing a command sheet
The image may differ depending on how the designated area is drawn, so re-
member the following when making the command sheet:
Designated area
Part of the designated
area is surrounded by
3 sides of the entire
area.
Double line pattern.
The designated area is
surrounded by 3 sides
of another designated
area.
Non-closed line
12
Area recognized
Only the outer line
is recognized.
Preferred designated area
Make a space of at least 2 mm,
0.08", in front of the area
surrounded by 3 sides (relative to
the feed direction).
Feed
Direction
Make a gap of at least 2 mm, 0.08"
in width.
Make a space of at least 2 mm,
0.08" in front of the area
surrounded by 3 sides (relative to
the feeding direction).
Feed
Direction
Designate the area with a closed
line.
Space
Space