Ricoh VT6000 Manual page 145

CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No. Mode
Auto Cycle
43 Mode Default
setting
Memory/Class
44 Mode Default
setting
Make-up
Background
46 Pattern
Default
Setting
Directional
Magnification
50
Mode
Selection
Clear
51
Multi-copy
136
Specifies whether Auto Cycle mode is selected at
power on.
Default: 0
Adjustment value:
Specifies Memory or Class mode at power on.
Default: 1
Adjustment value:
0: Class 1: Memory
This function can be used only when you have the
Make-up function. Specifies the default make-up mode
background pattern that is selected when the Make-up
key is pressed.
Default: 0
Adjustment value:
1 to 40, 51 to 90, 101 to 140, 151 to 190
0: No background pattern
You can select whether you can input the reproduction
ratios for each vertical and horizontal directions or you
can input each vertical and horizontal lengths of original
and print paper.
Default: 0
Adjustment value:
0: reproduction ratio
1: vertical and horizontal lengths of original and print
paper
Specifies whether Multi Copy mode is cleared after
pressing the Master Making key.
Default: 0
Adjustment value:
Function
0: No 1: Yes
0: No 1: Yes