REPLENISHING SUPPLIES
Adding Staples
i
The Staple (
runs out of staples. When your machine is equipped with the 2 sorter
staplers, A or B is indicated at the end of second line of the guidance
display. If A is indicated, the sorter stapler next to the main frame has run
out of staples.
Do not remove the staple cartridge from the stapler except for adding staples.
Do not remove staple plate. It should remain in the stapler unit when you remove
the empty staple cartridge.
1
Open the stapler unit cover.
2
Lift the empty staple cartridge a
little and remove it from the sta-
pler unit.
3
Set the new staple cartridge and
push it until it clicks.
If any staples extend from the mouth
of the new staple cartridge, push
them back into the cartridge.
160
) and "H" indicators blink when the optional sorter stapler