Ricoh VT6000 Manual page 183

TROUBLESHOOTING
.
4
If you still cannot remove the mis-
fed paper, open the document
feeder and remove the original.
5
Close the ADF unit until it locks
in position.
To prevent original misfeeds:
Set the following kinds of originals on the exposure glass.
• Originals heavier than 127.9 g/m
• Originals lighter than 40.7 g/m
• Carbon coated originals
• Damaged originals
• Originals with glue on them
• Originals perforated for ring binders
• Folded, curled, or creased originals
• Bound, stapled, or clipped originals
• Originals larger than 307 mm x 432 mm, 12.0" x 17.0"
• Originals smaller than 90 mm x 140 mm, 3.6" x 5.6"
Do not mix different sizes of originals in the optional document feeder.
Clean the separation roller if it is dirty. (A dirty separation roller may slip and
cause original misfeeds.)
Remove staples or clips of originals. Fan originals that have had staples or clips
removed.
174
2
, 34 lb
2
, 10.8 lb