Ricoh VT6000 Manual page 6

SAFETY INFORMATION

WARNINGS:
• •
>
Only connect the machine to the power source de-
scribed on page 217 of this manual. Avoid multi-wiring
as it could cause an electric shock or a fire.
• •
Avoid using an extension cord.
• •
Do not damage, break or make any modifications to the
power cord. Do not place heavy objects on it, pull it
hard or bend it more than necessary. These actions
could cause an electric shock or fire.
• •
Do not plug or unplug the power cord with wet hands or
an electric shock might occur.
• •
B
Do not remove any covers or screws other than those
specified in this manual. Some parts of the machine are
at a high voltage and could give you an electric shock.
Also, if the machine has laser systems, direct (or indi-
rect) reflected eye contact with the laser beam may
cause serious eyes damage. When the machine needs
to be checked, adjusted or repaired, contact your serv-
ice representative.
• •
Do not take apart or attempt any modifications to this
machine. There is a risk of fire, electric shock, explosion
or loss of sight.
• •
C
If the machine looks damaged or breaks down, smoke is
coming out, there is a strange smell or anything looks
unusual, immediately turn off the main power switch
then unplug the power cord from the wall. Do not con-
tinue using the machine in this condition. Contact your
service representative.
• •
If any metal, liquid or foreign matter falls into the ma-
chine, turn off the main switch and unplug the main
power cord. Contact your service representative. Do not
keep using the machine with a fault or defect.
ii