Ricoh VT6000 Manual page 148

SP No. Mode
Auto Reset
83
Time
Auto Multi
84 Copy mode
selection
Memory
87
Stack mode
CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
Sets the auto reset time. The machine automatically
returns to the default settings if no keys are pressed
during its time period. This mode can also be turned off.
Default:
Adjustment value:
0: No
If you set an original on the exposure glass and press
the Multi-Copy key and Master Making key, two or
four identical images are printed on one sheet.
Default: 0
Adjustment value:
0: Multi Copy mode
1: Auto Multi Copy mode
For how to make prints in Auto Multi Copy mode,
see page 124.
You cannot set an original in the optional document
feeder in Auto Multi Copy mode.
In Memory mode, you set several originals each of
which a different number of sets can be printed. In
Memory Stack mode, you can print several different
stacks from one original.
Default:
Adjustment value:
0: Memory mode
For how to make prints in Memory Stack mode,
see page 125.
You can use this function when your machine is
equipped with the optional tape dispenser.
You cannot set 2 or more originals in the optional
document feeder in Memory Stack mode.
Function
0
1 to 5 minutes
0
1: Memory Stack mode
139