Ricoh VT6000 Manual page 177

TROUBLESHOOTING
Monitor
TURN SORTER ON
COMMUNICATION ERROR
PAPER LEFT ON SORTER
REMOVE PAPER
STAPLE NOT AVAILABLE
DIFFERENT PAPER SIZE
H
STAPLE NOT AVAILABLE
OVER-LOADED/FLOWING
STAPLE NOT AVAILABLE
CHECK PAPER SIZE
168
The power cord of the sorter stapler may not be plugged in.
Plug it in firmly.
Connection between the machine and the sorter stapler is
wrong. Contact your service representative.
Paper remains on the bins. Remove paper from the bins.
You cannot staple different sized paper when you use Auto
Staple or Manual Staple mode. Make prints on the same
sized paper or staple prints using the Bypass Feed Staple
function.
Sheets of paper over the maximum staple capacity of bins
( see page 85 or 86) have been delivered to the bins.
Reduce the number of prints. If you still want to staple
prints, use the Bypass Feed Stapling.
When you use paper other than the designated paper size,
you cannot use Auto Staple or Manual Staple mode. Use
the proper paper size described on page 85 or 86.
Guidance Display and Action