Ricoh VT6000 Manual page 147

CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
SP No. Mode
Auto Quality
80
Start setting
Skip Feed
82
Number
138
If the machine is not used for a long period of time, the
image density might decrease because the ink on the
drum might dry. The Auto Quality Start function
automatically recovers image density quality after a
selected time has passed, regardless of the number of
times the machine is used. You can also select how
many times the Quality Start mode is carried out after
the following time period has passed. If Auto Quality
Start is set to be "No", you can regain print quality by
making a few extra prints.
Default: Auto Quality Start mode:
0 to 6 hours:
6 to 32 hours:
32 to 72 hours:
Adjustment value:
Auto Quality Start mode:
0 to 6 hours:
6 to 32 hours:
32 to 72 hours: 0 to 10 times
If you use the Quality Start function before 6 hours
have passed after the last operation, the image
density may not be recovered earlier. However, it is
convenient to use this function when you change
drum unit and make prints before 6 hours have
passed after the last operation.
When you use the Skip Feed Printing function, you can
select how many times the drum rotates while one
sheet of paper is fed. If you select more than 2 times,
you can also select whether you use paper longer than
432 mm, 17.0" or not.
Default: Skip Feed Number: 2
Long sheet:
Adjustment value:
Skip Feed Number:
Long sheet:
Function
0
2
3
0: No 1: Yes
0 to 10 times
0 to 10 times
0
1 to 9 times
0: No 1: Yes
1