Ricoh VT6000 Manual page 165

REPLENISHING SUPPLIES
4
The new master roll must be po-
sitioned as shown in the illustra-
tion.
When you set the new roll, make
sure that you hold the both sides of
the spools with both hands. If you
hold the master directory, master
may be creased and it causes poor
print image.
5
Tear the paper band by holding
the instruction label and remove it
by pulling the label.
6
Insert the paper edge of the mas-
ter roll under the arrow mark (1)
until you can see the leading
edge under the transparent
cover.
Rotate the spools backward to take
up any slack in the master.
156
(1)