Ricoh VT6000 Manual page 215

TROUBLESHOOTING
If there is no margin or if there is a solid image area near the leading edge of the
original, make a margin of at least 5 mm, 0.2" at the leading edge. Otherwise,
the paper exit pawl might become dirty and cause black lines on prints.
Check the following parts and clean them if they are dirty.
Platen cover. (
Exposure glass. (
Sheet. (
When black lines or stains still appear on prints even if you clean the above,
contact your service representative.
206
See page 162.)
See page 162.)
See page 163.)
Black line/stain