Ricoh VT6000 Manual page 51

OPERATION
Printing on thin paper
1
Set the side pads (move the side
pad levers to as shown opposite).
2
Position the pressure lever (A) to
the Thin paper position.
3
Push the pressure levers (B)
down.
There are two pressure levers (B).
Make sure that both levers are down.
If dog-eared or wrinkled prints are
delivered, push the levers up.
4
If printing on A3, 11" x 17", or
larger paper, push up the wing
guide release lever. If you want
to print on paper smaller than A3
or 11" x 17", push down the re-
lease lever.
42