User codes
With the user code function, operators must input an authorized code before
the machine will operate. The machine keeps rack of the number of prints
made under each code. In this mode, the following 20 user codes (fixed)
can be used to access the machine.
382, 191, 182, 173, 164, 155, 146, 137, 128, 119, 482, 291,
282, 273, 264, 255, 246, 237, 228, 219
To prevent unauthorized users from accessing the machine note down the codes
and then black out the codes from this manual.
How to enable user code mode (# 120)
The following procedure explains how to enable User Code mode. This
must be done before a user code can be input.
1
Press the keys on the operation
panel in the following order.
(1) Clear Modes key
(2) Clear key
(3) Enter key.
2
Enter "120" using the Number
keys and press the Enter key.
CHANGING DEFAULT SETTINGS (SERVICE PROGRAM MODE)
Auto Cycle
Program
On Line
Stop
1
2
3
4
5
6
7
8
9
Proof
C
0
#
Clear
Enter
1
2
4
5
7
8
C
0
Clear
Clear Modes
C
Master Making
Print Start
Stop
3
6
9
Proof
#
Enter
143