Ricoh VT6000 Manual page 82

4
Set the required image settings
and press the Master Making
key.
5
Make your prints.
If the next original has been set in
the document feeder before the ma-
chine stops, that original is fed auto-
matically and a trial print is delivered
to the paper delivery table after the
print of the first original is completed.
Check the image position of the trial
print of the next original. If neces-
sary, make proof prints using the
Proof key to check the image posi-
tion again.
When you set originals in the 50
originals document feeder, the last
original (original set on the top of the
original stack
feeder) will be delivered to the origi-
nal tray first and the first original
(original set at the bottom of the origi-
nal stack in the document feeder) will
be delivered to the original tray last.
So, the order of originals is inverted
as shown in the illustration. Reset the
order of originals.
After making prints, close the original
tray.
in the document
OPTIONAL FUNCTIONS
Master Making
Stop
Print Start
Proof
73