Ricoh VT6000 Manual page 166

7
Return the pressure release lever
(1) to its original position.
8
Press the master cut button (2) to
cut the leading edge of the mas-
ter roll.

Caution: When the master cut button
is pressed, the master roll
will rotate. Do not touch the
master roll. You may be in-
jured.
9
After the beeper sounds, open
the transparent cover and remove
the cut-off portion of the master
roll.
Remove the cut-off master com-
pletely to prevent master misfeed.
u
A
Return the original table to its
original position.
Slide the original table to the right un-
til it stops.
REPLENISHING SUPPLIES
(2)
(1)
157