5.7 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings, click the Advanced Setup button in
the General screen. The screen appears as shown.
Figure 51 Advanced
The following table describes the labels in this screen.
Table 41 Wireless LAN: Advanced
LABEL
Wireless Advanced Setup
RTS/CTS
Threshold
Fragmentation
Threshold
802.11 Mode
Apply
Cancel
Chapter 5 Wireless LAN
DESCRIPTION
Enter a value between 0 and 2432.
It is the maximum data fragment size that can be sent. Enter a value between 256 and
2432.
Select 802.11b to allow only IEEE 802.11b compliant WLAN devices to associate with
the ZyXEL Device.
Select 802.11g to allow only IEEE 802.11g compliant WLAN devices to associate with
the ZyXEL Device.
Select 802.11b/g to allow either IEEE 802.11b or IEEE 802.11g compliant WLAN
devices to associate with the ZyXEL Device. The transmission rate of your ZyXEL
Device might be reduced.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
P-2302HW/HWL-P1 Series User's Guide
103