Figure 91 Voip > Trunking > Peer Call; Table 75 Voip > Trunking > Peer Call - ZyXEL Communications P-2302HW-P1 Series User Manual

P-2302HW/HWL-P1 Series User's Guide
Figure 91 VoIP > Trunking > Peer Call
Each field is described in the following table.
Table 75 VoIP > Trunking > Peer Call
LABEL
Outgoing
Authentication
#
Name
Username
178
DESCRIPTION
You need to set up accounts for the peer devices you use in VoIP trunking. This is
the IP address of the remote peer device, as well as the username and password
needed to authenticate with the remote peer device.
This is an index number of your outgoing authentication accounts.
Enter a descriptive name for the remote peer device of this account. For example,
if the peer device is located in London, you might enter London as the account
name. This name is used when you configure call rules in the VoIP > Trunking >
Call Rules screen.
Enter the username needed to authenticate at the remote peer device. The remote
peer device must have the same username in an incoming authentication entry in
order to authenticate your connection. Enter up to 32 alphanumeric characters.
Chapter 13 VoIP Trunking