Main Window; Status Bar - ZyXEL Communications P-2302HW-P1 Series User Manual

Table 3 Navigation Panel Summary
LINK TAB
System General
Dynamic DNS
Time Setting
Logs View Log
Log Settings
Tools Firmware
Configuration
Restart

2.4.3 Main Window

The main window shows the screen you select in the navigation panel. It is discussed in more
detail in the rest of this document.
Right after you log in, the Status screen is displayed. See
information about the Status screen.

2.4.4 Status Bar

Check the status bar when you click Apply or OK to verify that the configuration has been
updated.
Chapter 2 Introducing the Web Configurator
FUNCTION
Use this screen to configure general system settings.
Use this screen to set up dynamic DNS.
Use this screen to change your ZyXEL Device's time and date.
Use this screen to view the logs for the categories that you selected.
Use this screen to change your ZyXEL Device's log settings.
Use this screen to upload firmware to your ZyXEL Device.
Use this screen to backup and restore the configuration or reset the factory
defaults to your ZyXEL Device.
Use this screen to reboot the ZyXEL Device without turning the power off.
P-2302HW/HWL-P1 Series User's Guide
Chapter 4 on page 77 for more
49