P-2302HW/HWL-P1 Series User's Guide
Figure 145 Maintenance > Tools > Firmware
Each field is described in the following table.
Table 125 Maintenance > Tools > Firmware
LABEL
File Path
Browse...
Upload
22.2.2 Firmware Upload Screens
Note: Do not turn off the device while firmware upload is in progress!
When the ZyXEL Device starts to upload firmware, the Firmware Upload in Process screen
appears.
266
DESCRIPTION
Enter the location of the .bin file you want to upload, or click Browse... to find it.
You must decompress compressed (.zip) files before you can upload them.
Click this to find the .bin file you want to upload.
Click this to begin uploading the selected file. This may take up to two minutes.
See
Section 22.2.2 on page 266
Note: Do not turn off the device while firmware upload is in
progress!
for more information about this process.
Chapter 22 Tools