Proportional Bandwidth Allocation; Application-Based Bandwidth Management; Subnet-Based Bandwidth Management; Application- And Subnet-Based Bandwidth Management - ZyXEL Communications P-2302HW-P1 Series User Manual

P-2302HW/HWL-P1 Series User's Guide

17.1.2 Proportional Bandwidth Allocation

Bandwidth management allows you to define how much bandwidth each class gets; however,
the actual bandwidth allotted to each class decreases or increases in proportion to actual
available bandwidth.

17.1.3 Application-based Bandwidth Management

You can create bandwidth classes based on individual applications (like VoIP, Web, FTP, E-
mail and Video for example).

17.1.4 Subnet-based Bandwidth Management

You can create bandwidth classes based on subnets. The following figure shows LAN subnets.
You could configure one bandwidth class for subnet A and another for subnet B.

Figure 113 Subnet-based Bandwidth Management Example

17.1.5 Application- and Subnet-based Bandwidth Management

You could also create bandwidth classes based on a combination of a subnet and an
application. The following example table shows bandwidth allocations for application specific
traffic from separate LAN subnets.

Table 85 Application and Subnet-based Bandwidth Management Example

TRAFFIC TYPE
VoIP
Web
FTP
E-mail
Video
206
FROM SUBNET A
64 Kbps
64 Kbps
64 Kbps
64 Kbps
64 Kbps
FROM SUBNET B
64 Kbps
64 Kbps
64 Kbps
64 Kbps
64 Kbps
Chapter 17 Bandwidth MGMT