Chapter 18 Remote Mgmt; Remote Management Overview; Remote Management Limitations; Remote Management And Nat - ZyXEL Communications P-2302HW-P1 Series User Manual

Use these screens to control which computers can use which services to access the ZyXEL
Device on each interface.

18.1 Remote Management Overview

Remote management allows you to determine which services/protocols can access which
ZyXEL Device interface (if any) from which computers.
You may manage your ZyXEL Device from a remote location via:
• Internet (WAN only)
• LAN only
To disable remote management of a service, select Disable in the corresponding Server
Access field.
You may only have one remote management session running at a time. The ZyXEL Device
automatically disconnects a remote management session of lower priority when another
remote management session of higher priority starts. The priorities for the different types of
remote management sessions are as follows.
1 Telnet
2 HTTP

18.1.1 Remote Management Limitations

Remote management over LAN or WAN will not work when:
1 You have disabled that service in one of the remote management screens.
2 The IP address in the Secured Client IP field does not match the client IP address. If it
does not match, the ZyXEL Device will disconnect the session immediately.
3 There is already another remote management session with an equal or higher priority
running. You may only have one remote management session running at one time.

18.1.2 Remote Management and NAT

When NAT is enabled:

Chapter 18 Remote MGMT

C
H A P T E R
Remote MGMT
• ALL (LAN and WAN)
• Neither (Disable).
P-2302HW/HWL-P1 Series User's Guide
1 8
219