Chapter 8 Wireless LAN
Table 30 Network > Wireless LAN > AP: WPA(2)
LABEL
Authentication Server
IP Address
Port Number
Shared Secret Enter a password (up to 31 alphanumeric characters) as the key to be
8.2.5 Wireless LAN Advanced Setup
Use this screen to configure advanced wireless settings. Click the Advanced
Setup button in the AP screen. The screen appears as shown.
See
Section 8.8.2 on page 122
screen.
Figure 48 Network > Wireless LAN > AP: Advanced Setup
The following table describes the labels in this screen.
Table 31 Network > Wireless LAN > AP: Advanced Setup
LABEL
RTS/CTS
Threshold
Fragmentation
Threshold
110
DESCRIPTION
Enter the IP address of the external authentication server in dotted
decimal notation.
Enter the port number of the external authentication server.
You need not change this value unless your network administrator
instructs you to do so with additional information.
shared between the external authentication server and the ZyXEL
Device.
The key must be the same on the external authentication server and
your ZyXEL Device. The key is not sent over the network.
for detailed definitions of the terms listed in this
DESCRIPTION
Enter a value between 0 and 2432.
This is the maximum data fragment size that can be sent. Enter a value
between 256 and 2432.
P-660HN-TxA User's Guide