Figure 78 Voip > Sip > Qos; Table 62 Voip > Sip > Qos - ZyXEL Communications P-2302HW-P1 Series User Manual

Figure 78 VoIP > SIP > QoS
Each field is described in the following table.
Table 62 VoIP > SIP > QoS
LABEL
SIP TOS Priority
Setting
RTP TOS Priority
Setting
Voice VLAN ID
Apply
Cancel
Chapter 9 SIP
DESCRIPTION
Enter the priority for SIP voice transmissions. The ZyXEL Device creates Type of
Service priority tags with this priority to voice traffic that it transmits.
Enter the priority for RTP voice transmissions. The ZyXEL Device creates Type of
Service priority tags with this priority to RTP traffic that it transmits.
Select this if the ZyXEL Device has to be a member of a VLAN to communicate
with the SIP server. Ask your network administrator, if you are not sure. Enter the
VLAN ID provided by your network administrator in the field on the right. Your LAN
and gateway must be configured to use VLAN tags.
Otherwise, clear this field.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2302HW/HWL-P1 Series User's Guide
153