P-2302HW/HWL-P1 Series User's Guide
Figure 120 Management > Remote MGMT > FTP
Each field is described in the following table.
Table 97 Management > Remote MGMT > FTP
LABEL
Server Port
Server Access
Secured Client IP
Address
Apply
Cancel
18.3 SNMP
Simple Network Management Protocol (SNMP) is a protocol used for exchanging
management information between network devices. SNMP is a member of the TCP/IP
protocol suite. Your ZyXEL Device supports SNMP agent functionality, which allows a
manager station to manage and monitor the ZyXEL Device through the network. The ZyXEL
Device supports SNMP version one (SNMPv1) and version two (SNMPv2). The next figure
illustrates an SNMP management operation.
Note: SNMP is only available if TCP/IP is configured.
222
DESCRIPTION
Enter the port number this service can use to access the ZyXEL Device. The
computer must use the same port number.
Select the interface(s) through which a computer may access the ZyXEL Device
using this service.
Select All to allow any computer to access the ZyXEL Device using this service.
Select Selected to only allow the computer with the IP address that you specify to
access the ZyXEL Device using this service.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 18 Remote MGMT