P-2302HW/HWL-P1 Series User's Guide
Note: If you do not enable any wireless security on your ZyXEL Device, your network
is accessible to any wireless networking device that is within range.
Figure 40 Wireless: No Security
The following table describes the labels in this screen.
Table 35 Wireless No Security
LABEL
Security Mode
5.4.2 WEP Encryption Screen
Use this screen to enable and configure WEP encryption. Click Network > Wireless LAN to
display the General screen and select Static WEP from the Security Mode list.
94
DESCRIPTION
Choose No Security from the drop-down list box.
Chapter 5 Wireless LAN