Figure 50 Mac Address Filter; Table 40 Mac Address Filter - ZyXEL Communications P-2302HW-P1 Series User Manual

P-2302HW/HWL-P1 Series User's Guide

Figure 50 MAC Address Filter

The following table describes the labels in this menu.

Table 40 MAC Address Filter

LABEL
MAC Address
Filter
Active
Filter Action
Set
MAC Address Enter the MAC addresses of the wireless station that are allowed or denied access to
Apply
Cancel
102
DESCRIPTION
Select the check box to enable MAC address filtering.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Deny to block access to the ZyXEL Device, MAC addresses not listed will be
allowed to access the ZyXEL Device
Select Allow to permit access to the ZyXEL Device, MAC addresses not listed will be
denied access to the ZyXEL Device.
This is the index number of the MAC address.
the ZyXEL Device in these address fields. Enter the MAC addresses in a valid MAC
address format, that is, six hexadecimal character pairs, for example,
12:34:56:78:9a:bc.
Click Apply to save your changes back to the ZyXEL Device.
Click Cancel to reload the previous configuration for this screen.
Chapter 5 Wireless LAN