ZyXEL Communications P-2302HW-P1 Series User Manual page 255

Table 109 Maintenance > Logs > Log Settings
LABEL
Send Alerts to
Log Schedule
Day for Sending
Log
Time for Sending
Log
Clear log after
sending mail
Syslog Logging
Active
Syslog Server IP
Address
Log Facility
Active Log and
Alert
Log
Send immediate
alert
Apply
Cancel
Chapter 21 Logs
DESCRIPTION
Enter the e-mail address to which alerts are sent by e-mail. Leave this field blank if
you do not want to send alerts by e-mail.
Select the frequency with which the ZyXEL Device should send log messages by
e-mail.
• Daily
• Weekly
• Hourly
• When Log is Full
• None.
If the Weekly or the Daily option is selected, specify a time of day when the E-mail
should be sent. If the Weekly option is selected, then also specify which day of the
week the E-mail should be sent. If the When Log is Full option is selected, an
alert is sent when the log fills up. If you select None, no log messages are sent.
This field is only available when you select Weekly in the Log Schedule field.
Select which day of the week to send the logs.
This field is only available when you select Daily or Weekly in the Log Schedule
field.
Enter the time of day in 24-hour format (for example 23:00 equals 11:00 pm) to
send the logs.
Select this to clear all logs and alert messages after logs are sent by e-mail.
Syslog logging sends a log to an external syslog server used to store logs.
Select this to enable syslog logging.
Enter the server name or IP address of the syslog server that logs the selected
categories of logs.
Select a location. The log facility allows you to log the messages in different files in
the syslog server. See the documentation of your syslog for more details.
Select the categories of logs that you want to record.
Select the categories of alerts that you want the ZyXEL Device to send
immediately.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
P-2302HW/HWL-P1 Series User's Guide
255