P-2302HW/HWL-P1 Series User's Guide
Table 18 VoIP Setup Wizard > SIP Settings
LABEL
Check here to set
up SIP2 settings
< Back
Next >
Exit
3.3.2 Registration Complete
This screen depends on whether or not the ZyXEL Device successfully registered your SIP
account(s).
68
DESCRIPTION
This field is available in the SIP1 Settings screen.
Select this if you want to set up the SIP2 account, as well as the SIP1 account.
Click this to go to the previous screen.
Click this to go to the next screen. If you select Check here to set up SIP2
settings, the
SIP Settings
Device tries to register your SIP account(s). The following screen appears.
Figure 24 VoIP Setup Wizard > Registration Test
Wait until it finishes.
Click this to close this screen and return to the main screen.
screen appears again for SIP2. Otherwise, the ZyXEL
Chapter 3 Wizard Setup