Nat Port Forwarding Edit Screen; Nat Trigger Port Screen; Figure 68 Network > Nat > Port Forwarding > Edit; Table 56 Network > Nat > Port Forwarding > Edit - ZyXEL Communications P-2302HW-P1 Series User Manual

P-2302HW/HWL-P1 Series User's Guide
Table 55 Network > NAT > Port Forwarding
LABEL
Apply
Cancel

8.2.3 NAT Port Forwarding Edit Screen

Use this screen to activate, deactivate, and edit each port-forwarding rule in the ZyXEL
Device. To access this screen, click an Edit icon in Network > NAT > Port Forwarding.
Figure 68 Network > NAT > Port Forwarding > Edit
Each field is described in the following table.
Table 56 Network > NAT > Port Forwarding > Edit
LABEL
Active
Service Name
Start Port
End Port
Server IP Address Enter the IP address of the server to which to forward packets for the selected port
Apply
Cancel

8.2.4 NAT Trigger Port Screen

Use this screen to maintain port-triggering rules in the ZyXEL Device. To access this screen,
click Network > NAT > Trigger Port.
136
DESCRIPTION
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
DESCRIPTION
Select this to enable this rule. Clear this to disable this rule.
Enter a name to identify this rule. You can use 1 - 31 printable ASCII characters, or
you can leave this field blank. It does not have to be a unique name.
Enter the port number or range of port numbers you want to forward to the
specified server.
To forward one port number, enter the port number in the Start Port and End Port
fields.
To forward a range of ports,
• enter the port number at the beginning of the range in the Start Port field
• enter the port number at the end of the range in the End Port field.
number(s). This server is usually on the LAN.
Click this to save your changes and to apply them to the ZyXEL Device.
Click this to set every field in this screen to its last-saved value.
Chapter 8 NAT