Remote Management And Nat; System Timeout; Configuring Www - ZyXEL Communications ZyXEL ZyAIR G-3000H User Manual

G-3000H User's Guide

12.1.2 Remote Management and NAT

When NAT is enabled:
• Use the ZyAIR's WAN IP address when configuring from the WAN.
• Use the ZyAIR's LAN IP address when configuring from the LAN.

12.1.3 System Timeout

There is a default system management idle timeout of five minutes (three hundred seconds).
The ZyAIR automatically logs you out if the management session remains idle for longer than
this timeout period. The management session does not time out when a statistics screen is
polling. You can change the timeout period in the System screen

12.2 Configuring WWW

To change your ZyAIR's World Wide Web settings, click REMOTE MGNT to display the
WWW screen.
148 Chapter 12 Remote Management Screens